Follow these easy steps to get your Zanussi LTE 4400 Dryer up and running in no time.
It is recommended that for your convenience, the machine is positioned close to your washing machine. To keep vibration and noise to a minimum when the dryer is in use, it should be placed on a firm, level surface. Once in its permanent operating position, check that the dryer is absolutely level with the aid of a spirit level. If it is not, raise or lower the two adjustable feet at the front of the machine until it is.
This tumble dryer is designed to be vented through to the open air. It should have its own ventilation system which should not be joined with any other ventilation system connected to any other appliance. Make sure there are no obstructing items or material near the air-intake louvres provided at the back (e.g. paper, rags etc.).
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Make sure that the appliance does not stand on its electrical supply cable.
Before starting up for the first time, it is advisable to load a few moist cloths into the dryer and let it run for about 20 minutes. This ensures that no dust and dirt is left in the drum.
Open the door by pulling the catch forwards. Load the items one at a time, shaking them out loosely, and close the door. Please check the laundry does not get caught between the door and filter.
Turn the programme selector dial to the desired programme or time, the mains-on light illuminates. If drying synthetics, switch on the LOW TEMP. button. Depress the START button to begin operation and the drying light will illuminate.
The machine stops automatically. Release the button(s). Turn the selector dial to ‘0’, the mains-on light goes out. Clean the filter after every drying programme to ensure correct functioning of the appliance.